Cleaning stone floors: how to do it properly?


AUTHOR: Joanne Graves

Are there stone floors in your home? They are probably dirty and have completely lost their appeal. I have great news for you – you can revive them and clean them so that they will perfectly fit your house.

I have made this guide so that you know exactly how to deep-clean stone flooring.

What will you need?

There are a couple of things that you should prepare before you start with the cleaning – nothing too crazy.

Prepare a bucket, clean cloths, brushes, a mop, a sponge, rubber gloves. All of the above you probably already have in your home. There are a couple of things that you may need to buy – a squeegee, a foam roller, stone floor cleaning products.

– The first step

You should always test the stone floor cleaning products that you have gotten from the store to avoid any damage to the flooring. Apply a very small amount in a corner and see if there is some type of reaction, damage, stain, etc.

– The second step

If everything is okay, proceed with mixing the cleaner with water in a bucket. Apply with the squeegee for larger areas and a sponge for corners and smaller areas.

– The third step

After you leave the cleaner for 10-15 minutes, make sure you scrub all areas that have stains and dirt patches with a brush.

– The fourth step

It’s time to wipe everything clean. Fill in a bucket with water, grab the mop, and start cleaning. When done, grab a cloth and dry the surface.

Regular maintenance of stone floors

It’s normal for any type of flooring to get dirty. There are some little steps you can do on a regular basis that will ensure the cleanliness of your stone floors for longer.

Mop at least once a week and sweep your floors on a daily basis to remove dirt and dust.

CATEGORY: Uncategorized

Copyright 2021. NsThemes WordPress Theme. | 523: Origin is unreachable

Error 523

Ray ID: 66167baa9c432bd4 • 2021-06-18 18:11:57 UTC

Origin is unreachable








What happened?

The origin web server is not reachable.

What can I do?

If you\'re a visitor of this website:

Please try again in a few minutes.

If you\'re the owner of this website:

Check your DNS Settings. A 523 error means that Cloudflare could not reach your host web server. The most common cause is that your DNS settings are incorrect. Please contact your hosting provider to confirm your origin IP and then make sure the correct IP is listed for your A record in your Cloudflare DNS Settings page. Additional troubleshooting information here.